Among the variety of building materials, one of the leading places is occupied by corrugated board. So!
Corrugated board is a wave -shaped profiled sheet of steel, which is used for purposes such as the installation of roofs, fences, partitions, walls, etc. Steel has a thickness of 0.4 to 1.0 millimeters, and its surface is covered with a layer of polymer coating. Actually, this material is not in vain universal, for it solves many problems in the issue of construction.
Corrugated board is an ideal material in many respects. For example, its specific gravity is so small that special equipment is not required to transport it, and therefore you save considerable means! Small weight is also very appropriate during installation, since the risk of injuries is significantly reduced.
You should know that there are types of corrugated board and they are designated by the letter index “C”, “H” and “NS”. Consider these types individually:
1) Type “C” has a trapezoidal or sinusoidal shape of the corrugation. The height of the “waves” is from 8 to 44 millimeters (C8, C10, C13, C20, C21, C35, C44). Used as light roof, decor, or in light designs.
2) Type “H” has additional stiffener ribs, the height of the corrugation of more than 44 millimeters (H57, H60, H75, H114). Used as a floor overlap, capital roof and capital formwork.
3) Type “NS” wave height is 35 and 44 millimeters (NS35 and NS44). Used mainly in only two directions: roof and walls.
It is recommended to purchase corrugated board from proven and authoritative manufacturers of the material!
High -quality corrugated board does not burn out under the direct rays of the sun, and also easily tolerates the heating temperature above +60*C! Low temperature indicators are not terrible: paint and polymer coating remain unharmed.
As for the life of this material, it is more than 40 years!
But the most attractive in corrugated board (in addition to its technical characteristics) is its cost: choosing this particular material, you will save more than 20% of the cash!
In general, if you want to get high quality work without overpaying extra money, then use corrugated board: this is exactly the material that helps saves time and money! Moreover, the seller consultants are always ready to tell you exactly the kind of corrugated board that you need. And in which case, it is possible to go to the place of work, in order to make the correct calculations of the material: how much is needed and what is needed.
You still think how to save money and get quality?