In some apartments, there are too large rooms that ask for a division into two. Especially if you have children or you lovers to spend time separately from relatives living next to you, alone. In order to realize your dreams and desires, you can disperse the room with drywall partitions. Plasterboard partitions consist of a frame and sheathing. With the help of partitions, you can distinguish between space and bring jewelry to your decor.
Two types of profiles are used that allow you to block the room.
The main role in the profiles is played by the frame. It can have a different length, height, width, as well as decorative protrusions or recesses.
Depending on the metal profile, installation and fixation is carried out. There are certain rules for each profile.
A profile is a canvas that is made by a cold rolling of a galvanized tape. Regardless of the profile used, this method is applied. The canvas is metal and long. The frame has a standardized length of 2.8 m, 3.05 m and 4 m. However, sometimes a 6-meter.
During operation, 2 profiles are used – rack and guide.
The second is indicated by the abbreviation “PS”. It is a canvas that consists of a back and 2 shelves. On the latter are one above the other, three grooves. The central of them is a place for the joint of paintings.
Side are used to screw screws.
At right angles in relation to the back, shelves are bent. The edge of the shelves is directed inside the profile in the same way. This allows you to protect work. Thus, the ability to cut the cut of the metal with sharp edges of the metal. Stand profile, in turn, can be 2 species (50/50 and 100/50). Types differ in the width of the back. However, the shelves remain the same. Their width is 50 mm.
Another type that is necessary for installing partitions is a guide. It is defined as “PN”. Are built of P-shaped, as well as rack. In contrast, it has other sizes and the edges of the shelves are bent inward. However, they are thoroughly processed. These are the main differences of the “guide”.
In this profile, the width of the shelves is 40 mm. As well as in the previous one, the width of the back is different. As well as rack – 100 mm and 50 mm. The one is selected that has the same width as the width of the rack metal profile used during the partition of the room. Unlike him, has holes. Their sections 8 mm. They are intended for fixing to the supporting surfaces. They are attached to her with dowels.