Installation of keramoplast 500 must be performed in a strict sequence indicated in the instructions attached to the kit with the material. If there is a violation of the instructions, then the manufacturer has the right to remove any warranty obligations from himself. Therefore, before starting the installation of the roof, it is necessary to familiarize yourself with the recommendations and requirements, and in the case of incomprehensible moments, seek help from a specialist.
Installation of sheets can be done in two ways: with a displacement or, as it is also called, by laying a “zigzag”, as well as a standard way, that is, when the roof replacement occurs in a checkerboard order.
Using the first method, the joint of two sheets of one row is in the middle of the other row. This avoids covering the overlap of four sheets in one place. The second method is common. With this method, in the joints of the joint, just the same imposition of four sheets is formed on each other.
If the operated roof has a large area, then to simplify the installation of the roof replacement begins with the first lower row, after which the side row is laid, at an angle of 90 degrees – to the skate itself, and only then the rest of the area. The fastening of the sheets should not begin thoroughly, but first making each sheet with 2-3 mounting screws. And only after all sheets of the row are laid, you can firmly fix the roof.